M83461/1-328 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M83461/1-328: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.270 INCHES NOMINAL IN, center_hole_diameter: 1.835 INCHES MINIMUM AND 1.865 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-160-4345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M83461/1-328

NSN: 5331-01-160-4345
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	2.270 INCHES NOMINAL IN
center_hole_diameter	1.835 INCHES MINIMUM AND 1.865 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
material_document_and_classification	MIL-P-83461 MIL SPEC SINGLE MATERIAL RESPONSE
NSN	5331-01-160-4345

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 2.270 INCHES NOMINAL IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-83461 MIL SPEC SINGLE MATERIAL RESPONSE

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 1.835 INCHES MINIMUM AND 1.865 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
OUTSIDE DIAMETER	2.270 INCHES NOMINAL IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-P-83461 MIL SPEC SINGLE MATERIAL RESPONSE
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	1.835 INCHES MINIMUM AND 1.865 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 4

SAE-AS83461/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AN6227-31Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy M83461/1-328?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M83461/1-328?

M83461/1-328 is a O-RING.

What parts can replace M83461/1-328?

There are 4 known substitutes for M83461/1-328: SAE-AS83461/1, AN6227-31, MIL-P-83461/1 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M83461/1-328?

M83461/1-328 is cataloged in the U.S. Government catalog under NSN 5331-01-160-4345. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M83461/1-328 — O-RING

Request a Quote — M83461/1-328