PartsTable
Technical Data Sheet

M83461/1-254 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M83461/1-254: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include temp_rating: 275.0 FAHRENHEIT DEGF, center_hole_diameter: 5.484 INCHES NOMINAL IN, cross-sectional_height: 0.139 INCHES NOMINAL IN, end_item_identification: EUROFIGHTER NOSE WHEEL AH55105. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-471-6617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83461/1-254
NSN: 5331-01-471-6617
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
temp_rating275.0 FAHRENHEIT DEGF
center_hole_diameter5.484 INCHES NOMINAL IN
cross-sectional_height0.139 INCHES NOMINAL IN
end_item_identificationEUROFIGHTER NOSE WHEEL AH55105
NSN5331-01-471-6617
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83461/1-254 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.139 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 5.484 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.139 INCHES NOMINAL IN
CENTER HOLE DIAMETER5.484 INCHES NOMINAL IN
END ITEM IDENTIFICATIONEUROFIGHTER NOSE WHEEL AH55105
SUBSTITUTES & CROSS-REFERENCES 3
SAE-AS83461/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AMS-P-83461/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-P-83461/1BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy M83461/1-254?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83461/1-254?
M83461/1-254 is a O-RING.
What parts can replace M83461/1-254?
There are 3 known substitutes for M83461/1-254: SAE-AS83461/1, AMS-P-83461/1, MIL-P-83461/1B. Substitute compatibility should be verified for your specific system.
What is the NSN for M83461/1-254?
M83461/1-254 is cataloged in the U.S. Government catalog under NSN 5331-01-471-6617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83461/1-254