PartsTable
Technical Data Sheet
PartsTable / O-RING / M83461/1-132
M83461/1-132 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83461/1-132 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-146-4563, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83461/1-132
NSN: 5331-01-146-4563
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
Part NumberM83461/1-132
NSN5331-01-146-4563
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83461/1-132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.943 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER SYNTHETIC
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.943 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER SYNTHETIC
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MS28775-132Interchangeable
interchangeable cross-reference
interchangeable
230079062Interchangeable
interchangeable cross-reference
interchangeable
7-755-132000Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-83461/1Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AS83461/1Interchangeable
Same NIIN cross-reference
interchangeable
5331PL1740104Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83461/1-132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83461/1-132?
M83461/1-132 is a M83461/1-132.
What parts can replace M83461/1-132?
There are 10 known substitutes for M83461/1-132: MS28775-132, 230079062, 7-755-132000 and 7 more. Substitute compatibility should be verified for your specific system.
Is M83461/1-132 still available?
M83461/1-132 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83461/1-132

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026