M83461/1-122 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M83461/1-122: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.318 INCHES NOMINAL IN, center_hole_diameter: 1.102 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-131-1895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M83461/1-122

NSN: 5331-01-131-1895
NIINs: 011311895, 011489716
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.318 INCHES NOMINAL IN
center_hole_diameter	1.102 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-01-131-1895

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.318 INCHES NOMINAL IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 1.102 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.318 INCHES NOMINAL IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	1.102 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 6

10129575Reference document

Same NSN cross-reference

Reference document — Informative reference only

AMS-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

5331PL1953036Reference document

Same NSN cross-reference

Reference document — Informative reference only

SAE-AS83461/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MIL-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

845-7108571-ASSEMBLY-C ITEM 32Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M83461/1-122?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M83461/1-122?

M83461/1-122 is a O-RING.

What parts can replace M83461/1-122?

There are 6 known substitutes for M83461/1-122: 10129575, AMS-P-83461/1, 5331PL1953036 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M83461/1-122?

M83461/1-122 is cataloged in the U.S. Government catalog under NSN 5331-01-131-1895. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M83461/1-122 — O-RING

Request a Quote — M83461/1-122