PartsTable
Technical Data Sheet
PartsTable / O-RING / M83461/1-115CP
M83461/1-115CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83461/1-115CP is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-107-4953, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83461/1-115CP
NSN: 5331-01-107-4953
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83461/1-115CP
NSN5331-01-107-4953
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83461/1-115CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.880 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.880 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
845-2109845PC18Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-83461/M83461/1-115Interchangeable
interchangeable cross-reference
interchangeable
RV51-51ITEM8Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS83461/1Interchangeable
Same NIIN cross-reference
interchangeable
803-6397247-3XXX-15Interchangeable
Same NIIN cross-reference
interchangeable
OR1-115Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83461/1-115CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83461/1-115CP?
M83461/1-115CP is a M83461/1-115CP.
What parts can replace M83461/1-115CP?
There are 12 known substitutes for M83461/1-115CP: 845-2109845PC18, AMS-P-83461/M83461/1-115, RV51-51ITEM8 and 9 more. Substitute compatibility should be verified for your specific system.
Is M83461/1-115CP still available?
M83461/1-115CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83461/1-115CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026