PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M83461/1-023CP
M83461/1-023CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83461/1-023CP is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-245-1420, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83461/1-023CP
NSN: 5330-01-245-1420
FSC: 5330
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83461/1-023CP
NSN5330-01-245-1420
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83461/1-023CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
PERIPHERAL DIAMETER: 1.191 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
CENTER HOLE DIAMETER: 1.041 INCHES MINIMUM AND 1.061 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
PERIPHERAL DIAMETER1.191 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZW
CENTER HOLE DIAMETER1.041 INCHES MINIMUM AND 1.061 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
M83461/1-023Interchangeable
interchangeable cross-reference
interchangeable
A6689.023.222Interchangeable
interchangeable cross-reference
interchangeable
M83261/1-023Interchangeable
interchangeable cross-reference
interchangeable
803-4384536-3XX 1-49CPInterchangeable
Same NIIN cross-reference
interchangeable
4384536-3XX1-49Interchangeable
Same NIIN cross-reference
interchangeable
4384536-3XX1-49CPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83461/1-023CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83461/1-023CP?
M83461/1-023CP is a M83461/1-023CP.
What parts can replace M83461/1-023CP?
There are 6 known substitutes for M83461/1-023CP: M83461/1-023, A6689.023.222, M83261/1-023 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83461/1-023CP?
M83461/1-023CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-245-1420. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83461/1-023CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026