PartsTable
Technical Data Sheet
PartsTable / O-RING / M83461/1-020
M83461/1-020 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83461/1-020 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-107-4950, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83461/1-020
NSN: 5331-01-107-4950
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
Part NumberM83461/1-020
NSN5331-01-107-4950
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83461/1-020 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 1.004 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.855 INCHES MINIMUM AND 0.873 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER1.004 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
20113Interchangeable
interchangeable cross-reference
interchangeable
10132497Interchangeable
interchangeable cross-reference
interchangeable
8712289-2Interchangeable
interchangeable cross-reference
interchangeable
152363Interchangeable
interchangeable cross-reference
interchangeable
600Y13Interchangeable
interchangeable cross-reference
interchangeable
600 GP Y 13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83461/1-020?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83461/1-020?
M83461/1-020 is a M83461/1-020.
What parts can replace M83461/1-020?
There are 14 known substitutes for M83461/1-020: 20113, 10132497, 8712289-2 and 11 more. Substitute compatibility should be verified for your specific system.
Is M83461/1-020 still available?
M83461/1-020 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83461/1-020

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026