PartsTable
Technical Data Sheet
PartsTable / O-RING / M832481116
M832481116 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, peripheral_diameter: 0.943 INCHES NOMINAL IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-1068, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M832481116
NSN: 5331-00-166-1068
FSC: 5331 — O-RING
CAGE: K5974 — ROLLS-ROYCE PLC NAVAL MARINE (GBR)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
peripheral_diameter0.943 INCHES NOMINAL IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
departure_from_cited_documentMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
criticality_code_justificationZZZW
NSN5331-00-166-1068
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M832481116 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.728 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
OUTSIDE DIAMETER: 0.928 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.728 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
OUTSIDE DIAMETER0.928 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
AS3209-116Interchangeable
interchangeable cross-reference
interchangeable
946.91.27.761Interchangeable
interchangeable cross-reference
interchangeable
ST3001-116Interchangeable
interchangeable cross-reference
interchangeable
22046-14Interchangeable
interchangeable cross-reference
interchangeable
MILR25897Interchangeable
interchangeable cross-reference
interchangeable
4400173-0140Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M832481116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M832481116?
M832481116 is a O-RING.
What parts can replace M832481116?
There are 32 known substitutes for M832481116: AS3209-116, 946.91.27.761, ST3001-116 and 29 more. Substitute compatibility should be verified for your specific system.
Is M832481116 still available?
M832481116 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M832481116

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026