PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-906CP
M83248/2-906CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-906CP is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1981, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-906CP
NSN: 5331-00-165-1981
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83248/2-906CP
NSN5331-00-165-1981
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-906CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.461 INCHES MINIMUM AND 0.475 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
AS568-906Interchangeable
interchangeable cross-reference
interchangeable
S0455 3-906Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-906Interchangeable
interchangeable cross-reference
interchangeable
3096Interchangeable
interchangeable cross-reference
interchangeable
3906Interchangeable
interchangeable cross-reference
interchangeable
92062Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-906CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-906CP?
M83248/2-906CP is a M83248/2-906CP.
What parts can replace M83248/2-906CP?
There are 28 known substitutes for M83248/2-906CP: AS568-906, S0455 3-906, M83248/2-906 and 25 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-906CP still available?
M83248/2-906CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-906CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026