M83248/2-383 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M83248/2-383: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 14.395 INCHES NOMINAL IN, center_hole_diameter: 13.905 INCHES MINIMUM AND 14.045 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-147-0799, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M83248/2-383

NSN: 5331-01-147-0799
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
temp_rating	-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	90.0 SHORE DUROMETER A NOMINAL
outside_diameter	14.395 INCHES NOMINAL IN
center_hole_diameter	13.905 INCHES MINIMUM AND 14.045 INCHES MAXIMUM IN
cross-sectional_height	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN	5331-01-147-0799

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 14.395 INCHES NOMINAL IN

•

HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 13.905 INCHES MINIMUM AND 14.045 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
OUTSIDE DIAMETER	14.395 INCHES NOMINAL IN
HARDNESS RATING	90.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	13.905 INCHES MINIMUM AND 14.045 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 5

SAE-AS3581Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AMS7259DReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-R-83248/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

2106604Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

AS3581-383Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M83248/2-383?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M83248/2-383?

M83248/2-383 is a O-RING.

What parts can replace M83248/2-383?

There are 5 known substitutes for M83248/2-383: SAE-AS3581, AMS7259D, MIL-R-83248/2 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M83248/2-383?

M83248/2-383 is cataloged in the U.S. Government catalog under NSN 5331-01-147-0799. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M83248/2-383 — O-RING

Request a Quote — M83248/2-383