PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-330CP
M83248/2-330CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-330CP is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-528-6410, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-330CP
NSN: 5331-01-528-6410
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83248/2-330CP
NSN5331-01-528-6410
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-330CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CENTER HOLE DIAMETER: 2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONSEAWOLF CLASS SUBMARINE
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SPECIAL FEATURESMATTERIAL RUBBER FLOUROCARBON CLASS FKM;
CENTER HOLE DIAMETER2.082 INCHES MINIMUM AND 2.118 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
AS3581-904Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS3581Interchangeable
interchangeable cross-reference
interchangeable
ARP568-904MILG23652 TY2Interchangeable
interchangeable cross-reference
interchangeable
AMS7259Interchangeable
Same NIIN cross-reference
interchangeable
DF330618 FIND 10CPInterchangeable
Same NIIN cross-reference
interchangeable
CD-023-35-10CPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-330CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-330CP?
M83248/2-330CP is a M83248/2-330CP.
What parts can replace M83248/2-330CP?
There are 9 known substitutes for M83248/2-330CP: AS3581-904, SAE-AS3581, ARP568-904MILG23652 TY2 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/2-330CP?
M83248/2-330CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-528-6410. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-330CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026