PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M83248/2-236CP
M83248/2-236CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-236CP is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-552-9986, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-236CP
NSN: 5330-01-552-9986
FSC: 5330
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83248/2-236CP
NSN5330-01-552-9986
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-236CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 3.512 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
CENTER HOLE DIAMETER: 3.210 INCHES MINIMUM AND 3.258 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER3.512 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
CENTER HOLE DIAMETER3.210 INCHES MINIMUM AND 3.258 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEO-RING
END ITEM IDENTIFICATIONVALVE, GLOBE, 2.0 NPS
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AMS7259Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-236Interchangeable
interchangeable cross-reference
interchangeable
810344Interchangeable
interchangeable cross-reference
interchangeable
D2000Interchangeable
interchangeable cross-reference
interchangeable
222317Interchangeable
interchangeable cross-reference
interchangeable
7002-04Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-236CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-236CP?
M83248/2-236CP is a M83248/2-236CP.
What parts can replace M83248/2-236CP?
There are 14 known substitutes for M83248/2-236CP: AMS7259, M83248/2-236, 810344 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/2-236CP?
M83248/2-236CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-552-9986. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-236CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026