PartsTable
Technical Data Sheet

M83248/2-230CP — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M83248/2-230CP: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 2.762 INCHES NOMINAL IN, center_hole_diameter: 2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, end_item_identification: FLASK ASSY, HP AIR.. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-550-8007, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-230CP
NSN: 5330-01-550-8007
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter2.762 INCHES NOMINAL IN
center_hole_diameter2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
end_item_identificationFLASK ASSY, HP AIR.
cross-sectional_shape_styleO-RING
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
cross_section_outside_diameter0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5330-01-550-8007
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-230CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 2.762 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
CROSS-SECTIONAL SHAPE STYLEO-RING
ELONGATION PERCENTAGE125 MAXIMUM
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER2.762 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.464 INCHES MINIMUM AND 2.504 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONFLASK ASSY, HP AIR.
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
7383858-262160701-67-2CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H547-0001-262160701-67-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
2621-607-01-67-2CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M83248/2-230Reference document
Same NSN cross-reference
Reference document — Secondary reference
H547-0001-262160701-67-2CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2621-607-01-67-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M83248/2-230CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-230CP?
M83248/2-230CP is a PACKING,PREFORMED.
What parts can replace M83248/2-230CP?
There are 7 known substitutes for M83248/2-230CP: 7383858-262160701-67-2CP, H547-0001-262160701-67-2, 2621-607-01-67-2CP and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/2-230CP?
M83248/2-230CP is cataloged in the U.S. Government catalog under NSN 5330-01-550-8007. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-230CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.