PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-224
M83248/2-224 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-224 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-096-8819, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-224
NSN: 5331-01-096-8819
FSC: 5331 — O-RING
CAGE: 70106 — ACUSHNET RUBBER COMPANY, INC. DBA PRECIX (USA)
SPECIFICATIONS
Part NumberM83248/2-224
NSN5331-01-096-8819
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-224 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2 CLASS
•
TEMP RATING: -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 1.719 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MINIMUM
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2 CLASS
TEMP RATING-30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER1.719 INCHES MINIMUM AND 1.749 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MINIMUM
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIALRUBBER FLUOROCARBON CLASS FPM
CRITICALITY CODE JUSTIFICATIONZZZW
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
NAS1596-8Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-83248Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-83248CPInterchangeable
interchangeable cross-reference
interchangeable
AS3209Interchangeable
interchangeable cross-reference
interchangeable
5330PL1668257Interchangeable
interchangeable cross-reference
interchangeable
AS3209-011 CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-224?
M83248/2-224 is a M83248/2-224.
What parts can replace M83248/2-224?
There are 25 known substitutes for M83248/2-224: NAS1596-8, MIL-R-83248, MIL-R-83248CP and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/2-224?
M83248/2-224 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-096-8819. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-224

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026