PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-222
M83248/2-222 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-222 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-006-2129, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-222
NSN: 5331-01-006-2129
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83248/2-222
NSN5331-01-006-2129
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-222 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 1.762 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER1.762 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
91103-37635Interchangeable
interchangeable cross-reference
interchangeable
A6689-139-222Interchangeable
interchangeable cross-reference
interchangeable
AS568-222Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-25988 TY1CL1GR60Interchangeable
interchangeable cross-reference
interchangeable
2BE312Interchangeable
interchangeable cross-reference
interchangeable
530-431Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-222?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-222?
M83248/2-222 is a M83248/2-222.
What parts can replace M83248/2-222?
There are 26 known substitutes for M83248/2-222: 91103-37635, A6689-139-222, AS568-222 and 23 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-222 still available?
M83248/2-222 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-222

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026