PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-213CP
M83248/2-213CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-213CP is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-319-3441, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-213CP
NSN: 5331-01-319-3441
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83248/2-213CP
NSN5331-01-319-3441
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-213CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SPECIAL FEATURES90 HARDNESS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
ARP568-213MILG2 3652TYPE2Interchangeable
interchangeable cross-reference
interchangeable
AMS 7259Interchangeable
interchangeable cross-reference
interchangeable
20193PC37Interchangeable
interchangeable cross-reference
interchangeable
PLC-10864 ITEM 13Interchangeable
Same NIIN cross-reference
interchangeable
PL-3512 PIECE 13CPInterchangeable
Same NIIN cross-reference
interchangeable
AS3581-213Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-213CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-213CP?
M83248/2-213CP is a M83248/2-213CP.
What parts can replace M83248/2-213CP?
There are 10 known substitutes for M83248/2-213CP: ARP568-213MILG2 3652TYPE2, AMS 7259, 20193PC37 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/2-213CP?
M83248/2-213CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-319-3441. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-213CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026