PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-151
M83248/2-151 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-151 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-556-7506, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-151
NSN: 5331-00-556-7506
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83248/2-151
NSN5331-00-556-7506
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-151 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 2.963 INCHES MINIMUM AND 3.011 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.193 INCHES NOMINAL IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER2.963 INCHES MINIMUM AND 3.011 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.193 INCHES NOMINAL IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
AS3581-024Interchangeable
interchangeable cross-reference
interchangeable
AMS7259Interchangeable
interchangeable cross-reference
interchangeable
AS3581-151Interchangeable
Same NIIN cross-reference
interchangeable
V92151Interchangeable
Same NIIN cross-reference
interchangeable
MILR83248-2Interchangeable
Same NIIN cross-reference
interchangeable
SAE-AS3581Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-151?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-151?
M83248/2-151 is a M83248/2-151.
What parts can replace M83248/2-151?
There are 8 known substitutes for M83248/2-151: AS3581-024, AMS7259, AS3581-151 and 5 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-151 still available?
M83248/2-151 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-151

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026