PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-132CP
M83248/2-132CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-132CP is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-286-4695, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-132CP
NSN: 5331-01-286-4695
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83248/2-132CP
NSN5331-01-286-4695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-132CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
FSC APPLICATION DATA: 5 VALVE MANIFOLD
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
PERIPHERAL DIAMETER: 1.943 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.722 INCHES MINIMUM AND 1.752 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
FSC APPLICATION DATA5 VALVE MANIFOLD
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
PERIPHERAL DIAMETER1.943 INCHES NOMINAL IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
02704Interchangeable
interchangeable cross-reference
interchangeable
MIL-STD-1330Interchangeable
interchangeable cross-reference
interchangeable
11860-09-4Interchangeable
interchangeable cross-reference
interchangeable
BS1806-132Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-212CPInterchangeable
interchangeable cross-reference
interchangeable
516-5343916-F19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-132CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-132CP?
M83248/2-132CP is a M83248/2-132CP.
What parts can replace M83248/2-132CP?
There are 30 known substitutes for M83248/2-132CP: 02704, MIL-STD-1330, 11860-09-4 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/2-132CP?
M83248/2-132CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-286-4695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-132CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026