PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-115
M83248/2-115 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-115 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-099-2558, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-115
NSN: 5331-01-099-2558
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberM83248/2-115
NSN5331-01-099-2558
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2 CLASS
•
TEMP RATING: -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2 CLASS
TEMP RATING-30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CRITICALITY CODE JUSTIFICATIONZZZW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
AS3581-115Interchangeable
interchangeable cross-reference
interchangeable
PLC-10363 PIECE 15Interchangeable
interchangeable cross-reference
interchangeable
115-19359Interchangeable
interchangeable cross-reference
interchangeable
AS3581-115CPInterchangeable
interchangeable cross-reference
interchangeable
285008-0001 ITEM NO. 69 CPInterchangeable
interchangeable cross-reference
interchangeable
C-7022/2423 PIECE 14CPInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-115?
M83248/2-115 is a M83248/2-115.
What parts can replace M83248/2-115?
There are 11 known substitutes for M83248/2-115: AS3581-115, PLC-10363 PIECE 15, 115-19359 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/2-115?
M83248/2-115 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-099-2558. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-115

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026