PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-011CP
M83248/2-011CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-011CP is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-432-5835, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-011CP
NSN: 5331-01-432-5835
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83248/2-011CP
NSN5331-01-432-5835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-011CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CRITICALITY CODE JUSTIFICATIONZZZW
MATERIALRUBBER FLUOROCARBON CLASS FPM
END ITEM IDENTIFICATIONW/S: OLIVER PERRY CLASS FFG; WASP CLASS LHD; DIVERS LIFE SUPPORT SYSTEM; NIMITZ CLASS CVN; ARLEIGH BURKE CLASS DDG; EMORY S. LAND CLASS AS; FORRESTAL CLASS CV; SPRUANCE CLASS DD (963); TARAWA CLASS LHA
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
4420596-0110Interchangeable
interchangeable cross-reference
interchangeable
10182-2 ITEM9Interchangeable
interchangeable cross-reference
interchangeable
J222P011Interchangeable
interchangeable cross-reference
interchangeable
05555500/PC10Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-011Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-011D4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-011CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-011CP?
M83248/2-011CP is a M83248/2-011CP.
What parts can replace M83248/2-011CP?
There are 18 known substitutes for M83248/2-011CP: 4420596-0110, 10182-2 ITEM9, J222P011 and 15 more. Substitute compatibility should be verified for your specific system.
Is M83248/2-011CP still available?
M83248/2-011CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-011CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026