PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/2-001
M83248/2-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/2-001 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-295-1075, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/2-001
NSN: 5331-01-295-1075
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83248/2-001
NSN5331-01-295-1075
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/2-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 0.025 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER0.025 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AS568-001Interchangeable
interchangeable cross-reference
interchangeable
10V60-141-001Interchangeable
interchangeable cross-reference
interchangeable
C-69-001Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-83248 TY 1 CL 2Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS3581Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-455Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/2-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/2-001?
M83248/2-001 is a M83248/2-001.
What parts can replace M83248/2-001?
There are 14 known substitutes for M83248/2-001: AS568-001, 10V60-141-001, C-69-001 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M83248/2-001?
M83248/2-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-295-1075. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/2-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026