PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/1-455
M83248/1-455 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/1-455 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-005-2312, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-455
NSN: 5331-01-005-2312
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberM83248/1-455
NSN5331-01-005-2312
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-455 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 13.525 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 12.915 INCHES MINIMUM AND 13.035 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER13.525 INCHES NOMINAL IN
CENTER HOLE DIAMETER12.915 INCHES MINIMUM AND 13.035 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
150 HInterchangeable
interchangeable cross-reference
interchangeable
44178Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
7713PC121Interchangeable
interchangeable cross-reference
interchangeable
88H136Interchangeable
interchangeable cross-reference
interchangeable
5501PC161Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/1-455?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-455?
M83248/1-455 is a M83248/1-455.
What parts can replace M83248/1-455?
There are 24 known substitutes for M83248/1-455: 150 H, 44178, GGG-D-751 and 21 more. Substitute compatibility should be verified for your specific system.
Is M83248/1-455 still available?
M83248/1-455 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-455

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026