M83248/1-283 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

M83248/1-283: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 17.145 INCHES MINIMUM AND 17.321 INCHES MAXIMUM IN, center_hole_diameter: 16.875 INCHES MINIMUM AND 17.035 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-537-3927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M83248/1-283

NSN: 5331-00-537-3927
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	17.145 INCHES MINIMUM AND 17.321 INCHES MAXIMUM IN
center_hole_diameter	16.875 INCHES MINIMUM AND 17.035 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN	5331-00-537-3927

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 17.145 INCHES MINIMUM AND 17.321 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 16.875 INCHES MINIMUM AND 17.035 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER	17.145 INCHES MINIMUM AND 17.321 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	16.875 INCHES MINIMUM AND 17.035 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 7

2-283V0747-75Reference document

Same NSN cross-reference

Reference document — Secondary reference

MILR83248Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS3209-283Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-283V1226-75Reference document

Same NSN cross-reference

Reference document — Secondary reference

M3248/1-283Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS9388-283Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy M83248/1-283?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M83248/1-283?

M83248/1-283 is a O-RING.

What parts can replace M83248/1-283?

There are 7 known substitutes for M83248/1-283: 2-283V0747-75, MILR83248, AS3209-283 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for M83248/1-283?

M83248/1-283 is cataloged in the U.S. Government catalog under NSN 5331-00-537-3927. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M83248/1-283 — O-RING

Request a Quote — M83248/1-283