PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/1-222CP
M83248/1-222CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/1-222CP is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-192-4020, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-222CP
NSN: 5331-01-192-4020
FSC: 5331 — O-RING
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
Part NumberM83248/1-222CP
NSN5331-01-192-4020
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-222CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
SUPPLEMENTARY FEATURES: CLEAN IN ACCORDANCE WITH MIL-STD-1330
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.762 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
SUPPLEMENTARY FEATURESCLEAN IN ACCORDANCE WITH MIL-STD-1330
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.762 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
5331PL0675300Interchangeable
interchangeable cross-reference
interchangeable
4564-222EUInterchangeable
interchangeable cross-reference
interchangeable
4J523Interchangeable
interchangeable cross-reference
interchangeable
D3800-A066 ITEM 25Interchangeable
interchangeable cross-reference
interchangeable
AS3581-222CPInterchangeable
interchangeable cross-reference
interchangeable
AS3581-222Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/1-222CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-222CP?
M83248/1-222CP is a M83248/1-222CP.
What parts can replace M83248/1-222CP?
There are 15 known substitutes for M83248/1-222CP: 5331PL0675300, 4564-222EU, 4J523 and 12 more. Substitute compatibility should be verified for your specific system.
Is M83248/1-222CP still available?
M83248/1-222CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-222CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026