PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/1-220
M83248/1-220 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/1-220 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-8411, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-220
NSN: 5331-00-166-8411
FSC: 5331 — O-RING
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM83248/1-220
NSN5331-00-166-8411
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-220 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 1.617 INCHES MINIMUM AND 1.657 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.347 INCHES MINIMUM AND 1.371 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER1.617 INCHES MINIMUM AND 1.657 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.347 INCHES MINIMUM AND 1.371 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
19-660-389-00PC029Interchangeable
interchangeable cross-reference
interchangeable
AS568-220Interchangeable
interchangeable cross-reference
interchangeable
500311Interchangeable
interchangeable cross-reference
interchangeable
JANR11Interchangeable
interchangeable cross-reference
interchangeable
6502-3137220PCSYMB0LR124Interchangeable
interchangeable cross-reference
interchangeable
AS568-220CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/1-220?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-220?
M83248/1-220 is a M83248/1-220.
What parts can replace M83248/1-220?
There are 29 known substitutes for M83248/1-220: 19-660-389-00PC029, AS568-220, 500311 and 26 more. Substitute compatibility should be verified for your specific system.
Is M83248/1-220 still available?
M83248/1-220 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-220

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026