M81935/4-03K — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

M81935/4-03K: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP E4340 ROD END BODY, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN, overall_length: 1.6550 INCHES NOMINAL IN, hardness_rating: 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-366-6625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M81935/4-03K

NSN: 3120-01-366-6625
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	STEEL COMP E4340 ROD END BODY
shank_style	EXTERNALLY THREADED
thread_class	3A A
bore_diameter	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
overall_length	1.6550 INCHES NOMINAL IN
hardness_rating	28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
thread_diameter	0.250 INCHES NOMINAL IN
special_features	KEYWAY IN SHANK; SURFACE FINISH ON BALL PASSIVATE PER MIL-S-5002 OPTIONAL
style_designator	BALL TYPE
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM AND CHROMATE ROD END BODY
inner_member_width	0.2790 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
NSN	3120-01-366-6625

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 0.7350 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY

•

BORE CENTER TO SHANK END DISTANCE: 1.3050 INCHES MINIMUM AND 1.3250 INCHES MAXIMUM IN

•

INNER MEMBER WIDTH: 0.2790 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN

•

HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT

•

OUTER MEMBER WIDTH: 0.2230 INCHES MINIMUM AND 0.2330 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	0.7350 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
BORE CENTER TO SHANK END DISTANCE	1.3050 INCHES MINIMUM AND 1.3250 INCHES MAXIMUM IN
INNER MEMBER WIDTH	0.2790 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
OUTER MEMBER WIDTH	0.2230 INCHES MINIMUM AND 0.2330 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.250 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 2

SAE AS81935/4Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-B-81349/4Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy M81935/4-03K?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M81935/4-03K?

M81935/4-03K is a BEARING,PLAIN,ROD END.

What parts can replace M81935/4-03K?

There are 2 known substitutes for M81935/4-03K: SAE AS81935/4, MIL-B-81349/4. Substitute compatibility should be verified for your specific system.

What is the NSN for M81935/4-03K?

M81935/4-03K is cataloged in the U.S. Government catalog under NSN 3120-01-366-6625. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M81935/4-03K — BEARING,PLAIN,ROD END

Request a Quote — M81935/4-03K