M81935/2-08K — BEARING,PLAIN,ROD END

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

M81935/2-08K: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER, shank_style: INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE, thread_class: 3B, bore_diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, overall_length: 3.3750 INCHES NOMINAL IN, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-178-5935, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M81935/2-08K

NSN: 3120-01-178-5935
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
shank_style	INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE
thread_class	3B
bore_diameter	0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
overall_length	3.3750 INCHES NOMINAL IN
hardness_rating	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
thread_diameter	0.500 INCHES NOMINAL IN
special_features	KEYWAY IN SHANK; SURFACE FINISH ON BALL PASSIVATE PER MIL-S-5002 OPTIONAL
style_designator	BALL TYPE
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM AND CHROMATE ROD END BODY
inner_member_width	0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
NSN	3120-01-178-5935

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK THREAD LENGTH: 1.2500 INCHES MINIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY

•

BORE CENTER TO SHANK END DISTANCE: 2.2400 INCHES MINIMUM AND 2.2600 INCHES MAXIMUM IN

•

INNER MEMBER WIDTH: 0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN

•

HARDNESS RATING: 28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT

•

OUTER MEMBER WIDTH: 0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SHANK THREAD LENGTH	1.2500 INCHES MINIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
BORE CENTER TO SHANK END DISTANCE	2.2400 INCHES MINIMUM AND 2.2600 INCHES MAXIMUM IN
INNER MEMBER WIDTH	0.6230 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM RACE INSERT
HARDNESS RATING	55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
OUTER MEMBER WIDTH	0.5100 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM IN
STYLE DESIGNATOR	BALL TYPE
THREAD DIAMETER	0.500 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

AS81935Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-B-81935/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS81935/2Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M81935/2-08K?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M81935/2-08K?

M81935/2-08K is a BEARING,PLAIN,ROD END.

What parts can replace M81935/2-08K?

There are 3 known substitutes for M81935/2-08K: AS81935, MIL-B-81935/2, SAE-AS81935/2. Substitute compatibility should be verified for your specific system.

What is the NSN for M81935/2-08K?

M81935/2-08K is cataloged in the U.S. Government catalog under NSN 3120-01-178-5935. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M81935/2-08K — BEARING,PLAIN,ROD END

Request a Quote — M81935/2-08K