PartsTable
Technical Data Sheet

M81935/2 MODIFIED — BEARING,PLAIN,ROD END

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

M81935/2 MODIFIED: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL ROD END BODY, shank_style: INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE, thread_class: 3B, bore_diameter: 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN, overall_length: 1.7650 INCHES NOMINAL IN, thread_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-103-3904, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81935/2 MODIFIED
NSN: 3120-01-103-3904
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialSTEEL ROD END BODY
shank_styleINTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE
thread_class3B
bore_diameter0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN
overall_length1.7650 INCHES NOMINAL IN
thread_diameter0.250 INCHES NOMINAL IN
style_designatorBALL TYPE
thread_directionRIGHT-HAND
surface_treatmentCADMIUM ROD END BODY
inner_member_width0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
outer_member_width0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM IN
shank_thread_length0.7187 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
NSN3120-01-103-3904
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: M81935/2 MODIFIED · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 0.7187 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BALL TYPE
•
THREAD DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: DYFLON,FSCM 81376 MFR REF SINGLE MATERIAL RESPONSE RACE LINER
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH0.7187 INCHES MINIMUM AND 0.8125 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM IN
STYLE DESIGNATORBALL TYPE
THREAD DIAMETER0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONDYFLON,FSCM 81376 MFR REF SINGLE MATERIAL RESPONSE RACE LINER
OVERALL LENGTH1.7650 INCHES NOMINAL IN
SHANK WIDTH ACROSS WRENCH FLATS0.4270 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 6
AS81935Reference document
Same NSN cross-reference
Reference document — Secondary reference
DREF3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS81935/2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
M81934/2 MODIFIED 1Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-B-81935Reference document
Same NSN cross-reference
Reference document — Secondary reference
M81935/2-3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M81935/2 MODIFIED?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81935/2 MODIFIED?
M81935/2 MODIFIED is a BEARING,PLAIN,ROD END.
What parts can replace M81935/2 MODIFIED?
There are 6 known substitutes for M81935/2 MODIFIED: AS81935, DREF3, SAE-AS81935/2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81935/2 MODIFIED?
M81935/2 MODIFIED is cataloged in the U.S. Government catalog under NSN 3120-01-103-3904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81935/2 MODIFIED