PartsTable
Technical Data Sheet

M81935/1-06K — M81935/1-06K

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

M81935/1-06K: M81935/1-06K.

The M81935/1-06K is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 3120-01-455-2877, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81935/1-06K
NSN: 3120-01-455-2877
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberM81935/1-06K
Speed06K RPM
NSN3120-01-455-2877
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: M81935/1-06K · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
06K RPM Speed
•
SHANK THREAD LENGTH: 1.1560 INCHES MINIMUM AND 1.2180 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.4110 INCHES MINIMUM AND 0.4210 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BALL TYPE
•
THREAD DIAMETER: 0.3750 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH1.1560 INCHES MINIMUM AND 1.2180 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE1.9280 INCHES MINIMUM AND 1.9480 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.4110 INCHES MINIMUM AND 0.4210 INCHES MAXIMUM IN
STYLE DESIGNATORBALL TYPE
THREAD DIAMETER0.3750 INCHES NOMINAL IN
OVERALL LENGTH2.4355 INCHES MINIMUM AND 2.4655 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SHANK STYLEEXTERNALLY THREADED
SPECIAL FEATURES8 DEGREE SELF ALIGNING IN EITHER DIRECTION, GROOVES IN OUTER RACE MEMBER, KEYWAY IN SHANK, 0.0930 INCHES WIDE & 0.5600 INCHES DEEP & 1.2350 INCHES LONG IN
SUBSTITUTES & CROSS-REFERENCES 4
AS81935/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS81935Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS81935/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
M81935/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M81935/1-06K?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81935/1-06K?
M81935/1-06K is a M81935/1-06K.
What parts can replace M81935/1-06K?
There are 4 known substitutes for M81935/1-06K: AS81935/1, AS81935, SAE-AS81935/1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81935/1-06K?
M81935/1-06K is cataloged in the U.S. Government catalog under NSN 3120-01-455-2877. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81935/1-06K