M81934/2-10C022 — BEARING,PLAIN,SELF-ALIGNING

✓ Government record, cited

— · BALL BEARING

PRODUCT OVERVIEW

M81934/2-10C022: BEARING,PLAIN,SELF-ALIGNING.

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER, corner_shape: SQUARE INSIDE LEFT CORNER, flange_width: 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, overall_length: 0.7495 INCHES NOMINAL IN, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-286-5481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M81934/2-10C022

NSN: 3120-01-286-5481
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
corner_shape	SQUARE INSIDE LEFT CORNER
flange_width	0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
overall_length	0.7495 INCHES NOMINAL IN
surface_finish	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
style_designator	SOLID, EXTERNAL FLANGE ONE END
body_inside_diameter	0.6255 INCHES MINIMUM AND 0.6265 INCHES MAXIMUM IN
body_outside_diameter	0.8137 INCHES MINIMUM AND 0.8142 INCHES MAXIMUM IN
flange_outside_diameter	1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
material_document_and_classification	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
NSN	3120-01-286-5481

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY

•

CORNER SHAPE: SQUARE INSIDE RIGHT CORNER

•

FLANGE OUTSIDE DIAMETER: 1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN

•

BODY OUTSIDE DIAMETER: 0.8137 INCHES MINIMUM AND 0.8142 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CORNER SHAPE	SQUARE INSIDE RIGHT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	UNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER	1.2300 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER	0.8137 INCHES MINIMUM AND 0.8142 INCHES MAXIMUM IN
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER

SUBSTITUTES & CROSS-REFERENCES 3

AS81936/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-B-81934/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS81934/2Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy M81934/2-10C022?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M81934/2-10C022?

M81934/2-10C022 is a BEARING,PLAIN,SELF-ALIGNING.

What parts can replace M81934/2-10C022?

There are 3 known substitutes for M81934/2-10C022: AS81936/2, MIL-B-81934/2, AS81934/2. Substitute compatibility should be verified for your specific system.

What is the NSN for M81934/2-10C022?

M81934/2-10C022 is cataloged in the U.S. Government catalog under NSN 3120-01-286-5481. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M81934/2-10C022 — BEARING,PLAIN,SELF-ALIGNING

Request a Quote — M81934/2-10C022