PartsTable
Technical Data Sheet

M81934/1-11C032 — M81934/1-11C032

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

M81934/1-11C032: M81934/1-11C032.

The M81934/1-11C032 is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 3120-01-455-8792, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81934/1-11C032
NSN: 3120-01-455-8792
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
Part NumberM81934/1-11C032
NSN3120-01-455-8792
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: M81934/1-11C032 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 0.8762 INCHES MINIMUM AND 0.8767 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5643, 17-4PH, COND H PER MIL-H-6875 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
BODY INSIDE DIAMETER: 0.6880 INCHES MINIMUM AND 0.6890 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER0.8762 INCHES MINIMUM AND 0.8767 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5643, 17-4PH, COND H PER MIL-H-6875 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.9900 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.6880 INCHES MINIMUM AND 0.6890 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBEARING SLEEVE PLAIN, SELF LUBRICATING, 325 DEG F DEGF
END ITEM IDENTIFICATION2350-01-390-4683,RECOVERY VEHICLE,FULL TRACKED
MATERIALSTEEL COMP 630 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
SAE-AS81934/1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
AS81934Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-B-81934/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy M81934/1-11C032?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81934/1-11C032?
M81934/1-11C032 is a M81934/1-11C032.
What parts can replace M81934/1-11C032?
There are 3 known substitutes for M81934/1-11C032: SAE-AS81934/1, AS81934, MIL-B-81934/1. Substitute compatibility should be verified for your specific system.
What is the NSN for M81934/1-11C032?
M81934/1-11C032 is cataloged in the U.S. Government catalog under NSN 3120-01-455-8792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81934/1-11C032