PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/16-KB2C5N1F1
M81793/16-KB2C5N1F1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/16-KB2C5N1F1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-065-2671, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/16-KB2C5N1F1
NSN: 3110-01-065-2671
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/16-KB2C5N1F1
NSN3110-01-065-2671
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/16-KB2C5N1F1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING OUTSIDE DIAMETER: 0.3750 INCHES NOMINAL IN
•
INNER RING WIDTH: 0.1562 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
FLANGE OUTSIDE DIAMETER: 0.4220 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.1250 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
FLANGE WIDTH: 0.0360 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING OUTSIDE DIAMETER0.3750 INCHES NOMINAL IN
INNER RING WIDTH0.1562 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
FLANGE OUTSIDE DIAMETER0.4220 INCHES NOMINAL IN
OUTER RING WIDTH0.1250 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
FLANGE WIDTH0.0360 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
SFR1683EEK25Interchangeable
interchangeable cross-reference
interchangeable
M81793-FHEGAN0GAC71AA0Interchangeable
interchangeable cross-reference
interchangeable
M81793/16-KA1N2N1PPInterchangeable
interchangeable cross-reference
interchangeable
6013-340Interchangeable
interchangeable cross-reference
interchangeable
MIL-B-81793-16Interchangeable
interchangeable cross-reference
interchangeable
SFR144EEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/16-KB2C5N1F1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/16-KB2C5N1F1?
M81793/16-KB2C5N1F1 is a M81793/16-KB2C5N1F1.
What parts can replace M81793/16-KB2C5N1F1?
There are 33 known substitutes for M81793/16-KB2C5N1F1: SFR1683EEK25, M81793-FHEGAN0GAC71AA0, M81793/16-KA1N2N1PP and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81793/16-KB2C5N1F1?
M81793/16-KB2C5N1F1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-065-2671. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/16-KB2C5N1F1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026