PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/16-JB9CXN1E1
M81793/16-JB9CXN1E1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/16-JB9CXN1E1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-029-0792, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/16-JB9CXN1E1
NSN: 3110-01-029-0792
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/16-JB9CXN1E1
NSN3110-01-029-0792
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/16-JB9CXN1E1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH: 0.0360 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.1250 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
RETAINER FABRICATION METHOD: MOLDED
•
SURFACE FINISH: GROUND
•
OUTER RING OUTSIDE DIAMETER: 0.3125 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
FLANGE WIDTH0.0360 INCHES NOMINAL IN
OUTER RING WIDTH0.1250 INCHES NOMINAL IN
SHIELD QUANTITY2
RETAINER FABRICATION METHODMOLDED
SURFACE FINISHGROUND
OUTER RING OUTSIDE DIAMETER0.3125 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO. 7P
INNER RING WIDTH0.1562 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
SFR1683EEK25Interchangeable
interchangeable cross-reference
interchangeable
M81793-FHEGAN0GAC71AA0Interchangeable
interchangeable cross-reference
interchangeable
M81793/16-KA1N2N1PPInterchangeable
interchangeable cross-reference
interchangeable
6013-340Interchangeable
interchangeable cross-reference
interchangeable
MIL-B-81793-16Interchangeable
interchangeable cross-reference
interchangeable
SFR144EEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/16-JB9CXN1E1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/16-JB9CXN1E1?
M81793/16-JB9CXN1E1 is a M81793/16-JB9CXN1E1.
What parts can replace M81793/16-JB9CXN1E1?
There are 32 known substitutes for M81793/16-JB9CXN1E1: SFR1683EEK25, M81793-FHEGAN0GAC71AA0, M81793/16-KA1N2N1PP and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81793/16-JB9CXN1E1?
M81793/16-JB9CXN1E1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-029-0792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/16-JB9CXN1E1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026