PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/08-FA2N2N1AP
M81793/08-FA2N2N1AP ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/08-FA2N2N1AP is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-037-4270, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/08-FA2N2N1AP
NSN: 3110-01-037-4270
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/08-FA2N2N1AP
NSN3110-01-037-4270
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/08-FA2N2N1AP · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.0937 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO. 7P
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: OIL
•
OUTER RING OUTSIDE DIAMETER: 0.2500 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 0.2960 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING WIDTH0.0937 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO. 7P
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALOIL
OUTER RING OUTSIDE DIAMETER0.2500 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER0.2960 INCHES NOMINAL IN
FLANGE WIDTH0.0230 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
VSR2SSW3CF5G2Interchangeable
interchangeable cross-reference
interchangeable
SR2RHH5P24ZDL01Interchangeable
interchangeable cross-reference
interchangeable
405002-3Interchangeable
interchangeable cross-reference
interchangeable
SSRS77R10XR5E5Interchangeable
interchangeable cross-reference
interchangeable
7599556Interchangeable
interchangeable cross-reference
interchangeable
SR166SSW3CG32Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/08-FA2N2N1AP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/08-FA2N2N1AP?
M81793/08-FA2N2N1AP is a M81793/08-FA2N2N1AP.
What parts can replace M81793/08-FA2N2N1AP?
There are 16 known substitutes for M81793/08-FA2N2N1AP: VSR2SSW3CF5G2, SR2RHH5P24ZDL01, 405002-3 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81793/08-FA2N2N1AP?
M81793/08-FA2N2N1AP is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-037-4270. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/08-FA2N2N1AP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026