PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/07-JE1N5N1A1
M81793/07-JE1N5N1A1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/07-JE1N5N1A1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-9038, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/07-JE1N5N1A1
NSN: 3110-00-293-9038
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/07-JE1N5N1A1
NSN3110-00-293-9038
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/07-JE1N5N1A1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
FLANGE WIDTH: 0.0420 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
OUTER RING OUTSIDE DIAMETER: 0.6250 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
FLANGE OUTSIDE DIAMETER: 0.6900 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: OIL LUBRICATING
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
FLANGE WIDTH0.0420 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.5
OUTER RING OUTSIDE DIAMETER0.6250 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
FLANGE OUTSIDE DIAMETER0.6900 INCHES NOMINAL IN
LUBRICATION MATERIALOIL LUBRICATING
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
SS3FK3Interchangeable
interchangeable cross-reference
interchangeable
SS3FInterchangeable
interchangeable cross-reference
interchangeable
941131-154Interchangeable
interchangeable cross-reference
interchangeable
77NM082C4F5UInterchangeable
interchangeable cross-reference
interchangeable
9072532Interchangeable
interchangeable cross-reference
interchangeable
SS518FCHHP48L011Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/07-JE1N5N1A1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/07-JE1N5N1A1?
M81793/07-JE1N5N1A1 is a M81793/07-JE1N5N1A1.
What parts can replace M81793/07-JE1N5N1A1?
There are 32 known substitutes for M81793/07-JE1N5N1A1: SS3FK3, SS3F, 941131-154 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81793/07-JE1N5N1A1?
M81793/07-JE1N5N1A1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-9038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/07-JE1N5N1A1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026