PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/07-JD1C2N1J1
M81793/07-JD1C2N1J1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/07-JD1C2N1J1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-406-5311, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/07-JD1C2N1J1
NSN: 3110-00-406-5311
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/07-JD1C2N1J1
NSN3110-00-406-5311
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/07-JD1C2N1J1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
•
OUTER RING OUTSIDE DIAMETER: 0.5000 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
BORE SHAPE: STRAIGHT
•
FLANGE WIDTH: 0.0450 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 0.5470 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0004 INCHES MAXIMUM RADIAL IN
OUTER RING OUTSIDE DIAMETER0.5000 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE SHAPESTRAIGHT
FLANGE WIDTH0.0450 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER0.5470 INCHES NOMINAL IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-81087 MIL SPEC SINGLE MATERIAL RESPONSE
SHIELD QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
RYG9175619Interchangeable
interchangeable cross-reference
interchangeable
T57901Interchangeable
interchangeable cross-reference
interchangeable
41220Interchangeable
interchangeable cross-reference
interchangeable
SFR188SSW3-0-19Interchangeable
Same NIIN cross-reference
interchangeable
S814FRHH5P24LY28Interchangeable
Same NIIN cross-reference
interchangeable
SFR1885PPDC8K24-121Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/07-JD1C2N1J1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/07-JD1C2N1J1?
M81793/07-JD1C2N1J1 is a M81793/07-JD1C2N1J1.
What parts can replace M81793/07-JD1C2N1J1?
There are 6 known substitutes for M81793/07-JD1C2N1J1: RYG9175619, T57901, 41220 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81793/07-JD1C2N1J1?
M81793/07-JD1C2N1J1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-406-5311. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/07-JD1C2N1J1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026