PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/06-DA1N2N2PP
M81793/06-DA1N2N2PP ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/06-DA1N2N2PP is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-679-4151, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/06-DA1N2N2PP
NSN: 3110-00-679-4151
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/06-DA1N2N2PP
NSN3110-00-679-4151
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/06-DA1N2N2PP · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING OUTSIDE DIAMETER: 0.2500 INCHES NOMINAL IN
•
FLANGE OUTSIDE DIAMETER: 0.2960 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
BORE DIAMETER: 0.0781 INCHES NOMINAL IN
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
•
FLANGE WIDTH: 0.0230 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER RING OUTSIDE DIAMETER0.2500 INCHES NOMINAL IN
FLANGE OUTSIDE DIAMETER0.2960 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.7
BORE DIAMETER0.0781 INCHES NOMINAL IN
OVERALL WIDTH0.0937 INCHES NOMINAL IN
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
SPECIAL FEATURESTORQUE TESTED
FLANGE WIDTH0.0230 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
MILM17060SERVICEAInterchangeable
interchangeable cross-reference
interchangeable
80001Interchangeable
interchangeable cross-reference
interchangeable
2098974G1Interchangeable
interchangeable cross-reference
interchangeable
2299882G1Interchangeable
interchangeable cross-reference
interchangeable
IPD3K3124Interchangeable
interchangeable cross-reference
interchangeable
3K3124Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/06-DA1N2N2PP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/06-DA1N2N2PP?
M81793/06-DA1N2N2PP is a M81793/06-DA1N2N2PP.
What parts can replace M81793/06-DA1N2N2PP?
There are 21 known substitutes for M81793/06-DA1N2N2PP: MILM17060SERVICEA, 80001, 2098974G1 and 18 more. Substitute compatibility should be verified for your specific system.
Is M81793/06-DA1N2N2PP still available?
M81793/06-DA1N2N2PP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/06-DA1N2N2PP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026