PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M81793/02-HK4C5G2A1
M81793/02-HK4C5G2A1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The M81793/02-HK4C5G2A1 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-686-1051, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M81793/02-HK4C5G2A1
NSN: 3110-00-686-1051
FSC: 3110
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM81793/02-HK4C5G2A1
NSN3110-00-686-1051
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M81793/02-HK4C5G2A1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHIELD QUANTITY: 2
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.7
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: OIL
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES0.5000 GM CM MAX STARTING TORQUE UNDER 400 GM THRUST LOAD
SHIELD QUANTITY2
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.7
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALOIL
LOAD DIRECTIONRADIAL
CALIBRATION DESIGNATORCAO
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
R3SS5V448C0X011Interchangeable
interchangeable cross-reference
interchangeable
R3SS5VC01MILL6085AInterchangeable
interchangeable cross-reference
interchangeable
MIL-B-81793/2Interchangeable
interchangeable cross-reference
interchangeable
R3ZZRA7CB0P58T50L01Interchangeable
interchangeable cross-reference
interchangeable
2504900-2Interchangeable
interchangeable cross-reference
interchangeable
R3SSWX423K5VCB0 O-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M81793/02-HK4C5G2A1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M81793/02-HK4C5G2A1?
M81793/02-HK4C5G2A1 is a M81793/02-HK4C5G2A1.
What parts can replace M81793/02-HK4C5G2A1?
There are 14 known substitutes for M81793/02-HK4C5G2A1: R3SS5V448C0X011, R3SS5VC01MILL6085A, MIL-B-81793/2 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M81793/02-HK4C5G2A1?
M81793/02-HK4C5G2A1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-686-1051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M81793/02-HK4C5G2A1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026