M81511/30-18-1 — DUMMY CONNECTOR,RECEPTACLE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

M81511/30-18-1: DUMMY CONNECTOR,RECEPTACLE.

The DUMMY CONNECTOR,RECEPTACLE is a the manufacturer industrial component. Key specifications include shell_type: SOLID, overall_width: 1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM IN, overall_height: 1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM IN, overall_length: 0.700 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN, shell_material: ALUMINUM ALLOY, polarization_method: KEYWAY OR MULTIPLE KEYWAY. This part is cataloged in the U.S.

Government catalog under NSN 5935-00-250-5833, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M81511/30-18-1

NSN: 5935-00-250-5833
FSC: 5935 — Connectors, Electrical
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

shell_type	SOLID
overall_width	1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM IN
overall_height	1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM IN
overall_length	0.700 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
shell_material	ALUMINUM ALLOY
mating_end_quantity	1
polarization_method	KEYWAY OR MULTIPLE KEYWAY
insert_position_in_deg	0.0
shell_surface_treatment	NICKEL AND CHROMIUM
connector_locking_method	BAYONET PIN
environmental_protection	MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT
specification/standard_data	81349-MIL-C-81511-30 GOVERNMENT SPECIFICATION
NSN	5935-00-250-5833

COMPONENT DIAGRAM

KEY FEATURES

•

CONNECTOR LOCKING METHOD: BAYONET PIN

•

SHELL TYPE: SOLID

•

MATING END QUANTITY: 1

•

SHELL SURFACE TREATMENT: NICKEL AND CHROMIUM

•

INSERT POSITION IN DEG: 0.0

•

UNTHREADED MOUNTING HOLE DIAMETER: 0.116 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM IN
CONNECTOR LOCKING METHOD	BAYONET PIN
SHELL TYPE	SOLID
MATING END QUANTITY	1
SHELL SURFACE TREATMENT	NICKEL AND CHROMIUM
INSERT POSITION IN DEG	0.0
UNTHREADED MOUNTING HOLE DIAMETER	0.116 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
OVERALL LENGTH	0.700 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
OVERALL WIDTH	1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.057 INCHES MINIMUM AND 1.067 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

MIL-C-81511-30Reference document

Same NSN cross-reference

Reference document — Secondary reference

348-292-18000-01Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy M81511/30-18-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is M81511/30-18-1?

M81511/30-18-1 is a DUMMY CONNECTOR,RECEPTACLE.

What parts can replace M81511/30-18-1?

There are 2 known substitutes for M81511/30-18-1: MIL-C-81511-30, 348-292-18000-01. Substitute compatibility should be verified for your specific system.

What is the NSN for M81511/30-18-1?

M81511/30-18-1 is cataloged in the U.S. Government catalog under NSN 5935-00-250-5833. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

M81511/30-18-1 — DUMMY CONNECTOR,RECEPTACLE

Request a Quote — M81511/30-18-1