PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M8000M110
M8000M110 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 9.00 MILLIMETERS NOMINAL MM, overall_width: 0.4060 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M8000M110
NSN: 3110-00-156-3416
FSC: 3110
CAGE: 28298 — SMITH AND SMITH AIRCRAFT CO (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter9.00 MILLIMETERS NOMINAL MM
overall_width0.4060 INCHES NOMINAL IN
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
inner_ring_width0.3860 INCHES NOMINAL IN
outer_ring_width0.3150 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
NSN3110-00-156-3416
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M8000M110 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3150 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
INNER RING WIDTH: 0.3860 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3150 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
INNER RING WIDTH0.3860 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
B30Interchangeable
interchangeable cross-reference
interchangeable
MIL-S-80095TYPE1SIZE36Interchangeable
interchangeable cross-reference
interchangeable
TIP00877-050CT70Interchangeable
interchangeable cross-reference
interchangeable
5301-0250Interchangeable
interchangeable cross-reference
interchangeable
685RH-1/4-3/8SInterchangeable
interchangeable cross-reference
interchangeable
B8-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M8000M110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M8000M110?
M8000M110 is a BEARING,BALL,ANNULAR.
What parts can replace M8000M110?
There are 31 known substitutes for M8000M110: B30, MIL-S-80095TYPE1SIZE36, TIP00877-050CT70 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M8000M110?
M8000M110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M8000M110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026