PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M8000M10
M8000M10 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 2.0625 INCHES NOMINAL IN, load_direction: RADIAL, inner_ring_width: 0.2810 INCHES NOMINAL IN, outer_ring_width: 0.2500 INCHES NOMINAL IN, style_designator: SINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4339, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M8000M10
NSN: 3110-00-142-4339
FSC: 3110
CAGE: 28298 — SMITH AND SMITH AIRCRAFT CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter2.0625 INCHES NOMINAL IN
load_directionRADIAL
inner_ring_width0.2810 INCHES NOMINAL IN
outer_ring_width0.2500 INCHES NOMINAL IN
style_designatorSINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE
overall_outside_diameter2.6250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
lubrication_material_document_and_classificationMIL-PRF-23827 MIL SPEC SINGLE MATERIAL RESPONSE
NSN3110-00-142-4339
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M8000M10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.6250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
•
INNER RING WIDTH: 0.2810 INCHES NOMINAL IN
•
OUTER RING WIDTH: 0.2500 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-PRF-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE DIAMETER: 2.0625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER2.6250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR AIRFRAME BALL BEARINGS
INNER RING WIDTH0.2810 INCHES NOMINAL IN
OUTER RING WIDTH0.2500 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-PRF-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BORE DIAMETER2.0625 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
D78021Interchangeable
interchangeable cross-reference
interchangeable
B545Interchangeable
interchangeable cross-reference
interchangeable
A17505PC25Interchangeable
interchangeable cross-reference
interchangeable
588.50-100003-001Interchangeable
interchangeable cross-reference
interchangeable
4904257Interchangeable
interchangeable cross-reference
interchangeable
71018-0Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M8000M10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M8000M10?
M8000M10 is a BEARING,BALL,AIRFRAME.
What parts can replace M8000M10?
There are 17 known substitutes for M8000M10: D78021, B545, A17505PC25 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M8000M10?
M8000M10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M8000M10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026