PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M6952
M6952 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 0.8125 INCHES NOMINAL IN, bore_diameter: 1.0000 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.0600 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-938-9036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M6952
NSN: 3110-00-938-9036
FSC: 3110
CAGE: 55207 — ARROW-MASTER, INCORPORATED (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.8125 INCHES NOMINAL IN
bore_diameter1.0000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.0600 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-938-9036
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: M6952 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
BORE DIAMETER: 1.0000 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0600 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH0.8125 INCHES NOMINAL IN
BORE DIAMETER1.0000 INCHES NOMINAL IN
CONE CORNER RADIUS0.0600 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
15102Interchangeable
interchangeable cross-reference
interchangeable
7150A0020Interchangeable
interchangeable cross-reference
interchangeable
7150G0020Interchangeable
interchangeable cross-reference
interchangeable
2 IN.Interchangeable
Brush,artist's
interchangeable
888997-5168Interchangeable
Brush,artist's
interchangeable
GGG-T-70Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M6952?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M6952?
M6952 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace M6952?
There are 18 known substitutes for M6952: 15102, 7150A0020, 7150G0020 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M6952?
M6952 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-938-9036. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M6952

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026