PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M62217/1-20-5

M62217/1-20-5 — Technical Data Sheet

✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q TUBE, temp_rating: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 1.250 INCHES NOMINAL IN, outside_diameter: 1.625 INCHES NOMINAL IN, operating_pressure: 50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 280.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-142-1617, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M62217/1-20-5
NSN: 4720-01-142-1617
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q TUBE
temp_rating-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter1.250 INCHES NOMINAL IN
outside_diameter1.625 INCHES NOMINAL IN
operating_pressure50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure280.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
cross-sectional_shape_styleROUND
measuring_method_and_length5.000 INCHES NOMINAL OVERALL IN
specification/standard_data81349-MIL-H-62217 GOVERNMENT SPECIFICATION
layer_composition_and_location1ST LAYER WOVEN POLYESTER FIBER CORD AND 2ND LAYER WOVEN POLYESTER FIBER CORD AND 3RD LAYER WOVEN POLYESTER FIBER CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
outer_covering_environmental_protectionCOLD RESISTANT AND ETHYLENE GLYCOL RESISTANT AND HEAT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT
NSN4720-01-142-1617
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M62217/1-20-5 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER WOVEN POLYESTER FIBER CORD AND 2ND LAYER WOVEN POLYESTER FIBER CORD AND 3RD LAYER WOVEN POLYESTER FIBER CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
OUTSIDE DIAMETER: 1.625 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OPERATING PRESSURE: 50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MEASURING METHOD AND LENGTH: 5.000 INCHES NOMINAL OVERALL IN
•
MATERIAL: RUBBER SILICONE CLASS Q TUBE
•
OUTER COVERING ENVIRONMENTAL PROTECTION: COLD RESISTANT AND ETHYLENE GLYCOL RESISTANT AND HEAT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-62217 GOVERNMENT SPECIFICATION
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATION1ST LAYER WOVEN POLYESTER FIBER CORD AND 2ND LAYER WOVEN POLYESTER FIBER CORD AND 3RD LAYER WOVEN POLYESTER FIBER CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
OUTSIDE DIAMETER1.625 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT SINGLE RESPONSE DEGF
OPERATING PRESSURE50.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MEASURING METHOD AND LENGTH5.000 INCHES NOMINAL OVERALL IN
MATERIALRUBBER SILICONE CLASS Q TUBE
OUTER COVERING ENVIRONMENTAL PROTECTIONCOLD RESISTANT AND ETHYLENE GLYCOL RESISTANT AND HEAT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT
SPECIFICATION/STANDARD DATA81349-MIL-H-62217 GOVERNMENT SPECIFICATION
INSIDE SURFACE CONDITIONSMOOTH
BURST TEST PRESSURE280.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
4720PL1483235Interchangeable
interchangeable cross-reference
interchangeable
4720001770671Interchangeable
interchangeable cross-reference
interchangeable
10082411Interchangeable
interchangeable cross-reference
interchangeable
4720001770672Interchangeable
interchangeable cross-reference
interchangeable
7771-5Interchangeable
interchangeable cross-reference
interchangeable
39-3043-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M62217/1-20-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M62217/1-20-5?
M62217/1-20-5 is a HOSE,NONMETALLIC.
What parts can replace M62217/1-20-5?
There are 20 known substitutes for M62217/1-20-5: 4720PL1483235, 4720001770671, 10082411 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M62217/1-20-5?
M62217/1-20-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-142-1617. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M62217/1-20-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026