M6106/7-002P — Technical Data Sheet

✓ Verified by PartsTable

— · COMPONENT

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include duty_type: CONTINUOUS, time_delay: 0.01 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME, storage_type: GENERAL PURPOSE WAREHOUSE, cubic_measure: 0.544 CUBIC INCHES, overall_width: 0.525 INCHES MAXIMUM IN, overall_height: 1.010 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5945-01-325-0381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

M6106/7-002P

NSN: 5945-01-325-0381
FSC: 5945
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

duty_type	CONTINUOUS
time_delay	0.01 SECONDS MAXIMUM FIXED OPERATE AND RELEASE TIME
storage_type	GENERAL PURPOSE WAREHOUSE
coil_quantity	1
cubic_measure	0.544 CUBIC INCHES
overall_width	0.525 INCHES MAXIMUM IN
overall_height	1.010 INCHES MAXIMUM IN
overall_length	1.025 INCHES MAXIMUM IN
fragility_factor	MODERATELY RUGGED
special_features	FAILURE RATE 0.1 PERCENT
winding_quantity	1
features_provided	POLARIZED
NSN	5945-01-325-0381

COMPONENT DIAGRAM

KEY FEATURES

•

MOUNTING FACILITY PATTERN: IN-LINE SINGLE MOUNTING FACILITY

•

ENVIRONMENTAL PROTECTION: DUSTPROOF AND HERMETIC

•

WINDING DC RESISTANCE RATING: 288.0 OHMS MINIMUM AND 352.0 OHMS MAXIMUM SINGLE WINDING

•

MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 10.0 AMPERES AC AND 10.0 AMPERES DC RESISTIVE LOAD

•

OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP: 28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING

•

FEATURES PROVIDED: POLARIZED

•

TEST DATA DOCUMENT: 81349-MIL-R-6106 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

TECHNICAL CHARACTERISTICS (FLIS)

MOUNTING FACILITY PATTERN	IN-LINE SINGLE MOUNTING FACILITY
ENVIRONMENTAL PROTECTION	DUSTPROOF AND HERMETIC
WINDING DC RESISTANCE RATING	288.0 OHMS MINIMUM AND 352.0 OHMS MAXIMUM SINGLE WINDING
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	10.0 AMPERES AC AND 10.0 AMPERES DC RESISTIVE LOAD
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP	28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING
FEATURES PROVIDED	POLARIZED
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE	4.0 AMPERES AC AND 4.0 AMPERES DC MOTOR LOAD
TEST DATA DOCUMENT	81349-MIL-R-6106 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
SPECIAL FEATURES	FAILURE RATE 0.1 PERCENT

VERIFIED SUBSTITUTES & CROSS-REFERENCES 11

M83536/9-026MInterchangeable