PartsTable / COMPONENT / M605
M605
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SLEEVE,IGNITION TERMINAL is a the manufacturer industrial component. Key specifications include length: 0.562 INCHES NOMINAL IN, material: CERAMIC BODY, contact_type: SPRING, inside_diameter: 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, outside_diameter: 0.364 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN, special_features: SUPPORTS GRUMMAN A10 AIRCRAFT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1695, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
M605
NSN: 5330-00-291-1695 FSC: 5330 CAGE: 61208 — TWIN DISC, INCORPORATED DBA TWIN DISC MID-ATLANTIC (USA)
SPECIFICATIONS
length 0.562 INCHES NOMINAL IN material CERAMIC BODY contact_type SPRING inside_diameter 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN outside_diameter 0.364 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN special_features SUPPORTS GRUMMAN A10 AIRCRAFT accommodated_wire_size 7.0 MILLIMETERS NOMINAL MM contact_protrusion_length 0.234 INCHES NOMINAL IN NSN 5330-00-291-1695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: M605
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HOUSING BORE DIAMETER: 2.750 INCHES NOMINAL IN
• SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER 2.750 INCHES NOMINAL IN SEAL WIDTH 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT CASE STYLE SQUARE MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT ACCOMMODATED SHAFT DIAMETER 1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
AT1707 Interchangeable interchangeable cross-reference
interchangeable
677-0206-000 Interchangeable interchangeable cross-reference
interchangeable
3158 Interchangeable interchangeable cross-reference
interchangeable
PI2627 Interchangeable interchangeable cross-reference
interchangeable
RR-C-271 Interchangeable interchangeable cross-reference
interchangeable
L19 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy M605?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M605?
M605 is a SLEEVE,IGNITION TERMINAL.
What parts can replace M605?
There are 27 known substitutes for M605: AT1707, 677-0206-000, 3158 and 24 more. Substitute compatibility should be verified for your specific system.
Is M605 still available?
M605 is currently cancelled.