PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M6000-F
M6000-F ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR TUBE, temp_rating: -40.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN, outside_diameter: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN, operating_pressure: 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-470-3917, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M6000-F
NSN: 4720-01-470-3917
FSC: 4720
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR TUBE
temp_rating-40.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
outside_diameter1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
special_featuresHOSE/HOSE ASSEMBLY-SEAMLESS POLYCHLOROPRENE INNER TUBE-REINFORCED WITH ONE OR MOREFABRIC BRAIDS-POLYCHLOROPRENE COVER-MIL-H-6000
operating_pressure250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identification6115-01-462-0291
cross-sectional_shape_styleROUND
specification/standard_data81349-MIL-H-6000 GOVERNMENT SPECIFICATION
minimum_inside_bending_radius9.000 INCHES IN
part_name_assigned_by_controlling_agencyHOSE-AIRCRAFT RUBBER LOW PRESSURE
NSN4720-01-470-3917
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: M6000-F · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATING PRESSURE: 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MINIMUM INSIDE BENDING RADIUS: 9.000 INCHES IN
•
BURST TEST PRESSURE: 1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
OUTSIDE DIAMETER: 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION6115-01-462-0291
OPERATING PRESSURE250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
PART NAME ASSIGNED BY CONTROLLING AGENCYHOSE-AIRCRAFT RUBBER LOW PRESSURE
SPECIAL FEATURESHOSE/HOSE ASSEMBLY-SEAMLESS POLYCHLOROPRENE INNER TUBE-REINFORCED WITH ONE OR MOREFABRIC BRAIDS-POLYCHLOROPRENE COVER-MIL-H-6000
MINIMUM INSIDE BENDING RADIUS9.000 INCHES IN
BURST TEST PRESSURE1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OUTSIDE DIAMETER1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEROUND
INSIDE DIAMETER0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR TUBE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
160-12AInterchangeable
interchangeable cross-reference
interchangeable
160-12Interchangeable
interchangeable cross-reference
interchangeable
31J16012Interchangeable
interchangeable cross-reference
interchangeable
82052Interchangeable
interchangeable cross-reference
interchangeable
S690022Interchangeable
interchangeable cross-reference
interchangeable
421.1930.0000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M6000-F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M6000-F?
M6000-F is a BEARING,BALL,ANNULAR.
What parts can replace M6000-F?
There are 9 known substitutes for M6000-F: 160-12A, 160-12, 31J16012 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M6000-F?
M6000-F is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-470-3917. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M6000-F

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026