PartsTable
Technical Data Sheet
Download PDF

M6-170-05-SA — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

M6-170-05-SA: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.700 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING SPRING, thread_size: 0.250-20 UNC FIRST THREADED PORTION, special_features: SIX EQUALLY SPACED SCREWS ON BOTH UPPER AND LOWER MOUNTING PLATE, style_designator: RECTANGULAR W/WIRE ROPE, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-624-0372, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M6-170-05-SA
NSN: 5340-01-624-0372
FSC: 5340 — Hardware, Commercial
CAGE: 07QQ7 — ISOLATION DYNAMICS CORPORATION (USA)
SPECIFICATIONS
height1.700 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING SPRING
thread_size0.250-20 UNC FIRST THREADED PORTION
special_featuresSIX EQUALLY SPACED SCREWS ON BOTH UPPER AND LOWER MOUNTING PLATE
style_designatorRECTANGULAR W/WIRE ROPE
surface_treatmentPASSIVATE OVERALL
end_item_identificationNSN 2350-01-305-0028
material_document_and_classificationASTM A276 ASSN STD SINGLE MATERIAL RESPONSE MOUNTING PLATE ASSEMBLY
distance_between_mounting_hole_centers5.000 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyISOLATOR
NSN5340-01-624-0372
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M6-170-05-SA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 5.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR W/WIRE ROPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE MOUNTING PLATE ASSEMBLY
•
HEIGHT: 1.700 INCHES NOMINAL IN
•
THREAD SIZE: 0.250-20 UNC FIRST THREADED PORTION
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
DISTANCE BETWEEN MOUNTING HOLE CENTERS5.000 INCHES NOMINAL IN
STYLE DESIGNATORRECTANGULAR W/WIRE ROPE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A276 ASSN STD SINGLE MATERIAL RESPONSE MOUNTING PLATE ASSEMBLY
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-W-83420, TY I, COMP B MIL SPEC SINGLE MATERIAL RESPONSE SPRING
HEIGHT1.700 INCHES NOMINAL IN
THREAD SIZE0.250-20 UNC FIRST THREADED PORTION
SPECIAL FEATURESSIX EQUALLY SPACED SCREWS ON BOTH UPPER AND LOWER MOUNTING PLATE
SURFACE TREATMENTPASSIVATE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYISOLATOR
END ITEM IDENTIFICATIONNSN 2350-01-305-0028
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
13041539Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
M6-170-05-5AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy M6-170-05-SA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M6-170-05-SA?
M6-170-05-SA is a MOUNT,RESILIENT,UTILITY.
What parts can replace M6-170-05-SA?
There are 2 known substitutes for M6-170-05-SA: 13041539, M6-170-05-5A. Substitute compatibility should be verified for your specific system.
What is the NSN for M6-170-05-SA?
M6-170-05-SA is cataloged in the U.S. Government catalog under NSN 5340-01-624-0372. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M6-170-05-SA

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.