PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/9-F8
M5501/9-F8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/9-F8 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-227-5837, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/9-F8
NSN: 5340-01-227-5837
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/9-F8
NSN5340-01-227-5837
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/9-F8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
INSIDE DIAMETER LENGTH: 0.760 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.488 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
INSIDE DIAMETER LENGTH0.760 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
OVERALL DIAMETER0.488 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN
MATERIALPLASTIC
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
10086650Upgraded Successor
successor cross-reference
successor
832944-00Upgraded Successor
successor cross-reference
successor
1704-24Upgraded Successor
successor cross-reference
successor
5/8 SCUpgraded Successor
successor cross-reference
successor
NAS847Upgraded Successor
successor cross-reference
successor
NAS844-11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/9-F8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/9-F8?
M5501/9-F8 is a M5501/9-F8.
What parts can replace M5501/9-F8?
There are 26 known substitutes for M5501/9-F8: 10086650, 832944-00, 1704-24 and 23 more. Substitute compatibility should be verified for your specific system.
Is M5501/9-F8 still available?
M5501/9-F8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/9-F8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026