PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/9-F2
M5501/9-F2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/9-F2 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-203-7790, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/9-F2
NSN: 5340-01-203-7790
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/9-F2
NSN5340-01-203-7790
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/9-F2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 0.500 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
•
DESIGN TYPE: FRICTION
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.175 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE DIAMETER LENGTH0.500 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
DESIGN TYPEFRICTION
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, CLASS L, GRADE 1 OR GRADE 2 FED SPEC SINGLE MATERIAL RESPONSE
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
OVERALL DIAMETER0.175 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
MATERIALPLASTIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
10086650Upgraded Successor
successor cross-reference
successor
832944-00Upgraded Successor
successor cross-reference
successor
1704-24Upgraded Successor
successor cross-reference
successor
5/8 SCUpgraded Successor
successor cross-reference
successor
NAS847Upgraded Successor
successor cross-reference
successor
NAS844-11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/9-F2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/9-F2?
M5501/9-F2 is a M5501/9-F2.
What parts can replace M5501/9-F2?
There are 22 known substitutes for M5501/9-F2: 10086650, 832944-00, 1704-24 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M5501/9-F2?
M5501/9-F2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-203-7790. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/9-F2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026