PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M5501/7-F22
M5501/7-F22 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M5501/7-F22 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-079-7800, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M5501/7-F22
NSN: 5340-01-079-7800
FSC: 5340
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberM5501/7-F22
NSN5340-01-079-7800
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M5501/7-F22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH UNDER SHOULDER: 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
•
OPEN END INSIDE DIAMETER: 1.017 INCHES MINIMUM AND 1.037 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
•
CLOSED END OVERALL DIAMETER: 0.954 INCHES MINIMUM AND 0.974 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
OPEN END INSIDE DIAMETER1.017 INCHES MINIMUM AND 1.037 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, GRADE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
CLOSED END OVERALL DIAMETER0.954 INCHES MINIMUM AND 0.974 INCHES MAXIMUM IN
MATERIALPLASTIC, POLYETHYLENE (PP)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
102C1279-1Upgraded Successor
successor cross-reference
successor
8028447Upgraded Successor
successor cross-reference
successor
353122-4Upgraded Successor
successor cross-reference
successor
13Upgraded Successor
successor cross-reference
successor
6735707-19Upgraded Successor
successor cross-reference
successor
M5501/7-F2Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M5501/7-F22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M5501/7-F22?
M5501/7-F22 is a M5501/7-F22.
What parts can replace M5501/7-F22?
There are 22 known substitutes for M5501/7-F22: 102C1279-1, 8028447, 353122-4 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M5501/7-F22?
M5501/7-F22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-079-7800. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M5501/7-F22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026